標準號 |
頒布時間 |
英 文 名 稱 |
中文名稱 |
|
|
10 May 2006 |
Information technology - Telecommunications and information exchange between systems - WS-Session - Web Services for Application Session Services |
信息技術---系統間的遠程通訊和信息交換—WS會話—應用會話業務的Web業務 |
|
|
9 May 2006 |
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
旋轉電氣機械—第17部分：從轉爐反饋時的殼體感應馬達 |
|
|
9 May 2006 |
Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
核電站---影響安全的重要儀器和控制系統---基于計算機執行A類功能的系統 |
|
|
9 May 2006 |
Metallic communication cable test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - Line injection method |
金屬通信電纜測試方法---第4-6部分：電磁兼容(EMC)---表面?zhèn)鬟f阻抗---導線注入方法 |
|
|
9 May 2006 |
Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation as up to and above 3 GHz |
金屬通信電纜測試方法---第4-4部分：電磁兼容(EMC)---屏蔽柵減薄，當減薄到≥3 GHz時的測試方法 |
|
|
9 May 2006 |
Medical device software - Software life cycle processes |
醫用設備軟件---軟件的生命周期過程 |
|
|
9 May 2006 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for sub racks, chassis, backplanes, front panels and plug-in units |
電子設備用的機械結構的開發用摸指令---第2-3部分：分規范---25mm設備實踐的接口坐標尺寸---擴展的詳細規范---架子、底盤、底版、前面板和插頭組件的尺寸 |
|
|
9 May 2006 |
Amendment 2 - Household and similar electrical appliances - Safety - Part 1: General requirements |
修改2---家用和類似電器---安全性---第1部分：總要求 |
|
|
9 May 2006 |
Amendment 1 - Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems |
修改1---醫用電氣設備---第2-13部分：麻醉系統的安全性和基本性能專門要求 |
|
|
9 May 2006 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units |
電子設備機械結構---482,6 mm (19 in)系列機械結構尺寸---第3-104部分：按架子和插頭組件接口尺寸配合的連接器 |
|
|
5 May 2006 |
This Test Report Form applies to IEC 60745 2-3:2006 |
該測試報告格式適用于IEC 60745 2-3:2006 |
|
|
5 May 2006 |
Corrigendum 1 - Application of the short-circuit ratings of low-voltage switchgear and controlgear |
勘誤表1---低壓開關和控制器的短路電流額定值的應用 |
|
|
5 May 2006 |
Amendment 2 - Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
修改2---燈管控制器---第2-2部分：燈絲照明用的直流或交流供電的步降式變壓器的專門要求 |
|
|
5 May 2006 |
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
修改1---家用和類似電器---安全性---第2-80部分：風扇專門要求 |
|
|
5 May 2006 |
Amendment 1 - Ballasts for tubular fluorescent lamps - Performance requirements |
修改1---管狀熒光燈用鎮流器---性能要求 |
|
|
5 May 2006 |
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
管燈控制器---第2-13部分：發光二極管的直流或交流供電電子控制器的專門要求 |
|
|
5 May 2006 |
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules |
多用燈座---第2-2部分：發光二極管連接器專門要求 |
|
|
5 May 2006 |
Corrigendum 1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
勘誤表1—修改1---家用和類似電器---安全性---第2-40部分：電熱泵、空氣循環和減濕器的專門要求 |
|
|
4 May 2006 |
Data interchange on 120 mm and 80 mm Optical Disk using +R DL Format - Capacity: 8,55 and 2,66 Gbytes per Side (Recording speed 2,4x) |
120 mm 和80 mm光盤的數據交換，使用+R DL 格式-每面容量8,55 和 2,66 Gbt (錄制速度為 2,4x) |
|
|
4 May 2006 |
Information technology - Common Biometric Exchange Formats Framework - Part 2: Procedures for the operation of the Biometric Registration Authority |
信息技術---一般生物統計格式構架---第2部分：生物統計注冊機構的操作規程 |
|
|
4 May 2006 |
Information technology - Security techniques - Key management - Part 4: Mechanisms based on weak secrets |
信息技術---安全技術---密鑰管理---第4部分：以低保密為基礎的機制 |
|
|
2 May 2006 |
Information technology - Language independent arithmetic - Part 3: Complex integer and floating point arithmetic and complex elementary numerical functions |
信息技術---獨立算法語言---第3部分：綜合整數和浮點算法以及綜合基本數字功能 |