|
標準號
|
頒布時間
|
英文名稱
|
中文名稱 |
|
IEC 60384-13
|
19 January 2006
|
Fixed capacitors for use in electronic equipment – Part 13: Sectional specification – Fixed polypropylene film dielectric metal foil d.c. capacitors
|
電子設備用固定電位器---第13-1部分：分規范---固定聚丙烯膜電絕緣金屬膜d.c電容器
|
|
IEC 60384-13-1
|
19 January 2006
|
Fixed capacitors for use in electronic equipment – Part 13-1: Blank detail specification – Fixed polypropylene film dielectric metal foil d.c. capacitors – Assessment level E
|
電子設備用固定電位器---第13-1部分：空白詳細規范---固定聚丙烯膜電絕緣金屬膜d.c電容器---評估等級E
|
|
IEC 60216-4-1
|
19 January 2006
|
Electrical insulating materials – Thermal endurance properties – Part 4-1: Ageing ovens – Single-chamber ovens
|
電絕緣材料---耐熱性能---第4-1部分：老化箱---專用烘箱
|
|
IEC 62132-1
|
19 January 2006
|
Integrated circuits – Measurement of electromagnetic immunity, 150 kHz to 1 GHz – Part 1: General conditions and definitions
|
集成電路---電磁干擾測試，150 kHz 至 1 GHz – Part 1:一般條件和定義
|
|
IEC 61078
|
19 January 2006
|
Analysis techniques for dependability – Reliability block diagram and oo lean methods
|
可信性分析技術—可靠性板塊圖和傾斜方法
|
|
IEC 62310-2
|
19 January 2006
|
Static transfer systems (STS) – Part 2: Electromagnetic compatibility (EMC) requirements
|
靜電轉移系統（STS）---第2部分：電磁兼容（EMC）要求
|
|
IEC 62255-3
|
18 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 3: Filled cables – Sectional specification
|
寬帶數字通信（高比特率數字通路電信網絡）用多芯和對稱成對/組電纜---外部設備電纜---第3部分：填充型電纜—分規范
|
|
IEC 62255-2-1
|
18 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 2-1: Unfilled cables – Blank detail specification
|
寬帶數字通信（高比特率數字通路電信網絡）用多芯和對稱成對/組電纜---外部設備電纜---第2-1部分：非填充型電纜—空白詳細規范
|
|
IEC 62115
|
17 January 2006
|
Electric toys – Safety
|
電子玩具的風險
|
|
IEC 60464-1-am1
|
17 January 2006
|
Amendment 1 – Varnishes used for electrical insulation – Part 1: Definitions and general requirements
|
修改1—電絕緣用清漆---第1部分：定義和一般要求
|
|
IEC 60464-2-am1
|
17 January 2006
|
Amendment 1 – Varnishes used for electrical insulation – Part 2: Methods of test
|
修改1—電絕緣用清漆---第2部分：實驗方法
|
|
IEC 60464-3-1-am1
|
17 January 2006
|
Amendment 1 – Varnishes used for electrical insulation – Part 3: Specifications for individual materials – Sheet 1: Ambient curing finishing varnishes
|
修改1---電絕緣用清漆---第3部分：單一媒體規范—規范1：環境固化裝飾漆
|
|
IEC 60705-am2
|
17 January 2006
|
Amendment 2 – Household microwave ovens – Methods for measuring performance
|
修改2---家用微波爐---性能測試方法
|
|
IEC 61966-2-4
|
17 January 2006
|
Multimedia systems and equipment – Colour measurement and management – Part 2-4: Colour management – Extended-gamut YCC colour space for video applications – xvYCC
|
多媒體系和設備---彩色測量和管理---第2-4部分：彩色管理---電視用擴展范圍YCC彩色空間xvYCC
|
|
IEC 62305-3
|
17 January 2006
|
Protection against lightning – Part 3: Physical damage to structures and life hazard
|
閃電防護---第3部分：對結構的物理損壞和生命風險
|
|
IEC 62305-2
|
17 January 2006
|
Protection against lightning – Part 2: Risk management
|
閃電防護---第2部分：風險管理
|
|
IEC 62305-1
|
17 January 2006
|
Protection against lightning – Part 1: General principles
|
閃電防護---第1部分：總原則
|
|
IEC 62305-4
|
17 January 2006
|
Protection against lightning – Part 4: Electrical and electronic systems within structures
|
閃電防護---第4部分：結構內的電氣和電子系統
|
|
IEC 61280-2-11
|
17 January 2006
|
Fibre optic communication subsystem test procedures – Part 2-11: Digital systems – Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
|
光線通訊系統實驗程序---第2-11部分：數字體系---光信號質量監控用、采用振幅柱狀圖評定的平均Q-系數的測定
|
|
IEC 62255-2
|
17 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 2: Unfilled cables – Sectional specification
|
寬帶數字通信（高比特率數字通路電信網絡）用多芯和對稱成對/組電纜---外部設備電纜---第2部分：非填充型電纜---分規范
|
|
IEC 60684-3-233
|
17 January 2006
|
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
|
軟性絕緣套管---第3部分：單型套管規范---活頁規范233：阻燃、阻流、收縮率為2：1的高收縮率氟橡膠套管
|
|
IEC 62129
|
16 January 2006
|
Calibration of optical spectrum analyzers
|
光學頻譜分析儀的校準
|
|
IEC 62255-3-1
|
16 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 3-1: Filled cables – Blank detail specification
|
寬帶數字通信（高比特率數字通路電信網絡）用多芯和對稱成對/組電纜---外部設備電纜---第3-1部分：填充型電纜---空白詳細規范
|
|
IEC 61347-2-2
|
26 January 2006
|
Lamp control gear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
|
照明燈具控制器—第22部分：提供d.c.或a.c燈絲電子換位變換器的專門要求
|
|
IEC 61951-1
|
26 January 2006
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
|
次級電池和電池，包括鹼性或非酸性電解液---輕便密封可再充電的單個電池---第1部分：鎳鎘電池
|
|
IEC 62383
|
26 January 2006
|
Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components - Measurement, modelling and calculation methods
|
磁偏振波形的磁損耗的測定，包括較高諧波元器件的---測量，模擬和計算方法
|
|
IEC 62222
|
26 January 2006
|
Fire performance of communication cables installed in buildings
|
安裝在建筑物中的通信電纜的防火性能
|
|
IEC 61937-5
|
26 January 2006
|
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theater Systems) format(s)
|
數字音頻---采用IEC 60958非線性PCM編碼的音頻碼流接口---第5部分：符合DTS（數字劇院系統）格式的非線性PCM編碼
|
|
IEC 61347-2-1
|
25 January 2006
|
Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
|
照明控制器—第2-1部分：啟動器專門要求（除發光啟動器外）
|
|
IEC 60601-2-49
|
25 January 2006
|
Medical electrical equipment - Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment
|
醫療電子設備---第2-49部分：多功能病人監測儀的安全要求
|
|
IEC 60812
|
25 January 2006
|
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
|
系統可靠性分析技術---失效模式和效果分析程序(FMEA)
|
|
IEC/PAS 62459
|
25 January 2006
|
Sound system equipment – Electroacoustical transducers - Dynamic measurement of suspension parts
|
聲音系統設備---電聲變換器---懸吊部件的動態測量
|
|
IEC 60317-0-4
|
25 January 2006
|
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire
|
特種線圈導線規范---第0-4部分：總要求---纏繞樹脂或涂有清漆的玻璃纖維，裸露或涂有彩釉的矩形銅線
|
|
IEC 62067-am1
|
25 January 2006
|
Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
|
修改1---具有擠壓成型絕緣體的功率電纜及其額定電壓在150 kV (Um = 170 kV)至500 kV (Um = 550 kV)附件---實驗方法和要求
|
|
IEC/PAS 62458
|
25 January 2006
|
Sound system equipment - Electroacoustical transducers - Measurement of large signal parameters
|
聲音系統設備---電聲變換器---大信號參數測量
|
|
IEC 60384-19
|
25 January 2006
|
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene- terephthalate film dielectric surface mount d.c. capacitors
|
電子設備用固定電位器---第19-1部分：空白詳細規范---固定金屬化的聚乙烯-對苯二酸鹽膜電絕緣表面安裝d.c電容器
|
|
IEC 60384-19-1
|
25 January 2006
|
Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ
|
電子設備用固定電位器---第19-1部分：空白詳細規范---固定金屬化的聚乙烯-對苯二酸鹽膜電絕緣表面安裝d.c電容器---評定水平EZ
|
|
IEC 61937-6
|
25 January 2006
|
Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats
|
數字音頻---采用IEC 60958非線性PCM編碼的音頻碼流接口---第6部分：符合MPEG-2 AAC 和MPEG-4 AAC音頻格式的非線性PCM編碼
|
|
CISPR 22-am2
|
24 January 2006
|
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
|
修改2---信息技術設備—無線電干擾特性---測量范圍和方法
|
|
IEC 62255-4-1
|
24 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification
|
寬帶數字通信（高比特率數字通路通訊網）用多芯和對稱成對/組電纜---外部設備電纜---第4-1部分：空氣分支電纜---空白詳細規范
|
|
CISPR 22-am2
|
24 January 2006
|
Amendment 1 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
|
修改1---信息技術設備—無線電干擾特性---測量范圍和方法
|
|
CISPR 13-am2
|
24 January 2006
|
Amendment 2 - Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
|
修改2---聲音和電視廣播接收機和相關設備—無線電干擾特性---測量范圍和方法
|
|
CISPR 22-am2
|
24 January 2006
|
Amendment 2 - Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
|
修改2—信息技術設備—無線電干擾特性---測量范圍和方法
|
|
IEC 60745-2-2
|
24 January 2006
|
Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches
|
手持馬達---開動的電氣工具---安全性---第2-2部分：螺絲起子和扳手的專門要求
|
|
IEC 62255-4
|
24 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification
|
寬帶數字通信（高比特率數字通路通訊網）用多芯和對稱成對/組電纜---外部設備電纜---第4部分：空氣分支電纜---分規范
|
|
IECEN/TRF 60598-2-11
|
23 January 2006
|
This Test Report Form applies to IEC 60598-2-11:2005 used in conjunction with IEC 60598-1:2003 EN 60598-2-11:2005 used in conjunction with EN 60598-1:2004
|
該實驗報告表格用于IEC60598-2-11:2005，與 IEC 60598-1:2003 EN 60598-2-11:2005 和 EN 60598-1:2004一起使用
|
|
IECEN/TRF60335-2-105
|
23 January 2006
|
This Test Report Form applies to IEC 60335-2-105:2004 (1st Edition) used in conjunction with IEC 60335-1:2001 (4th Edition) + A1:2002 and /or EN 60335-2-105:2005 used in conjunction with EN 60335-1:2002 + A1:2004
|
該實驗報告表格用于IEC60335-2-105:2004 (1版) ，與 IEC 60335-1:2001 (4版) + A1:2002 和/或EN 60335-2-105:2005以及EN 60335-1:2002 + A1:2004一起使用
|
|
IEC 60929
|
23 January 2006
|
C-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
|
供C的熒光燈管電子鎮流器---性能要求
|
|
IECEN/TRF 61050
|
23 January 2006
|
This Test Report Form applies to IEC 61050:1991(ed.1) + am1:1994 and/or EN 61050:1992
|
該實驗報告表格用于IEC 61050:1991(第1版) + am1:1994 和/或 EN 61050:1992
|
|
IECEN/TRF 60947-5-5
|
23 January 2006
|
This Test Report Form applies to IEC 60947-5-5 : 2005 (Edition 1.1) EN 60947-5-5 : 2005
|
該實驗報告表格用于IEC60947-5-5 : 2005 (1.1版) EN 60947-5-5 : 2005
|
|
IECEN/TRF 60947-4-3
|
23 January 2006
|
This Test Report Form applies to IEC 60947-4-3 : 1999 (First Edition) + C1: 2000 EN 60947-4--3 : 2000 + C1: 2000
|
該實驗報告表格用于IEC60947-4-3 : 1999 (第1版) + C1: 2000 EN 60947-4--3 : 2000 + C1: 2000
|
|
IECEN/TRF 60598-2-24
|
23 January 2006
|
This Test Report Form applies to IEC 60598-2-24:1997 used in conjunction with IEC 60598-1:2003 EN 60598-2-24:1998 used in conjunction with EN 60598-1:2004
|
該實驗報告表格用于IEC60598-2-24:1997， 與 IEC 60598-1:2003 EN 60598-2-24:1998 EN 60598-1:2004一起使用
|
|
IECEN/TRF 60598-2-22
|
23 January 2006
|
This Test Report Form applies to IEC 60598-2-22:1997+A1:2002 used in conjunction with IEC 60598-1:2003 EN 60598-2-22:1998+A1:2003 used in conjunction with EN 60598-1:2004
|
該實驗報告表格用于IEC 60598-2-22: 1997+A1:2002，與IEC 60598-1:2003 EN 60598-2-22:1998+A1:2003 EN 60598-1:2004一起使用
|
|
IECEN/TRF 60598-2-19
|
23 January 2006
|
This Test Report Form applies to IEC 60598-2-19:1981+A1:1987+A2:1997 used in conjunction with IEC 60598-1:2003 EN 60598-2-19:1989+A1:1989+A2:1998 used in conjunction with EN 60598-1:2004
|
該實驗報告表格用于IEC 60598-2-19: 1981+A1:1987+A2:1997 與IEC 60598-1:2003 EN 60598-2-19:1989+A1:1989+A2:1998 EN 60598-1:2004一起使用
|
|
IEC 60335-2-17-am1
|
23 January 2006
|
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances
|
修改1---家用和類似電器---安全性—第2-17部分：毯子、墊子和類似軟性加熱器具的專門要求
|
|
IEC 60335-2-9-am2
|
23 January 2006
|
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
|
修改2---家用和類似電器---安全性—第2-9部分：烤架、面包機和類似輕便烤具的專門要求
|
|
IECEN/TRF 60335-2-59
|
23 January 2006
|
This Test Report Form applies to IEC 60335-2-59:2003 (Third Edition) in conjunction with IEC 60335-1:2001 (Fourth Edition), incl. A1:2004 EN 60335-2-59:2003, incl. A1:2004 in conjunction with EN 60335-1:2003, incl. A11:2004 and A1:2004
|
該實驗報告表格用于IEC 60335-2-59:2003 (第3版)，與 IEC 60335-1:2001 (第4版)一起使用, 包括 A1:2004 EN 60335-2-59:2003, 包括與 EN 60335-1:2003一起使用A1:2004, 包括A11:2004 和 A1:2004
|
|
IECEN/TRF 60335-2-44
|
23 January 2006
|
This Test Report Form applies to IEC 60335-2-44:2002 (Third Edition) in conjunction with IEC 60335-1:2001 (Fourth Edition), incl. A1:2004 EN 60335-2-44:2002, in conjunction with EN 60335-1:2003, incl. A11:2004 and A1:2004
|
該實驗報告表格用于IEC 60335-2-44:2002 (第3版)與 IEC 60335-1:2001 (第4版)一起使用, 包括 A1:2004 EN 60335-2-44:2002, 與 EN 60335-1:2003一起使用, 包括A11:2004 和 A1:2004
|
|
IECEN/TRF 60335-2-15
|
23 January 2006
|
This Test Report Form applies to IEC 60335-2-15:2002 (Fifth edition) + A1 : 2005 used in conjunction with IEC 60335-1:2001 (Fourth edition), incl. Corrigendum 1:2002 + A1:2004 EN 60335-2-15:2002 used in conjunction with EN 60335-1:2002 + A11:2004 + A1:2004 and EN 50366:2003
|
該實驗報告表格用于IEC 60335-2-15:2002 (第5版) + A1 : 2005 與IEC 60335-1:2001 (第4版)一起使用, 包括勘誤表1:2002 + A1:2004與 EN 60335-1:2002 + A11:2004 + A1:2004 和 EN一起使用的EN 60335-2-15:2002
|
|
IEC/TRF 60309-1,2
|
23 January 2006
|
This Test Report Form applies to IEC 60309-1, 4th Edition 1999 + A1:2005 and IEC 60309-2, 4th Edition 1999 + A1:2005
|
該實驗報告表格用于IEC 60309-1，第4版1999+ A1:2005 和 IEC 60309-2, 第4版 1999 + A1:2005
|
|
IEC 62255-5-1
|
23 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification
|
寬帶數字通信（高比特率數字通路通訊網）用多芯和對稱成對/組電纜---外部設備電纜---第5-1部分：填充分支電纜---空白詳細規范
|
|
IEC 62255-5
|
23 January 2006
|
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification
|
寬帶數字通信（高比特率數字通路通訊網）用多芯和對稱成對/組電纜---外部設備電纜---第5部分：填充分支電纜---分規范
|
|
IEC 60454-3-12
|
23 January 2006
|
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
|
電氣目的用的壓敏膠帶---第3部分：個材料規范—規范12：具有壓敏黏合劑的聚乙烯和丙烯酸膜膠帶
|
|
IEC 60745-2-11
|
23 January 2006
|
Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
|
手持馬達---開動的電氣工具---安全性---第2-11部分：往返鋸的專門要求
|
|
IEC 60745-2-4
|
23 January 2006
|
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
|
手持馬達---開動的電氣工具---安全性---第2-4部分：檀木和磨光器專門要求（除圓盤型外）
|
|
IEC 60745-2-12
|
23 January 2006
|
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators
|
手持馬達---開動的電氣工具---安全性---第2-12部分：特定震動專門要求
|
|
IEC 60335-2-73-am1
|
23 January 2006
|
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
|
修改1---家用和類似電器---安全性—第2-73部分：固定沉浸加熱器專門要求
|
|
IEC 60335-2-59-am1
|
23 January 2006
|
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
|
修改1---家用和類似電器—安全性---第2-59部分：殺蟲儀器專門要求
|
|
IEC 60568
|
23 January 2006
|
Nuclear power plants - Instrumentation important to safety - In-core instrumentation for neutron fluence rate (flux) measurements in power reactors
|
核發電廠---重要安全儀器---核反應堆中中子注量率(flux)用銦核儀
|
|
IEC 61912
|
23 January 2006
|
Application of the short-circuit ratings of low-voltage switchgear and controlgear
|
低壓開關設備和控制器的短路額定值的應用
|
|
IEC 61347-2-3-am2
|
23 January 2006
|
Amendment 2 - Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
|
修改2---照明燈具控制器—第2-3部分：提供a.c的熒光燈電子鎮流器專門要求
|
|
IEC 61347-2-8-am1
|
23 January 2006
|
Amendment 1 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
|
修改1---照明燈具控制器—第2-8部分：熒光燈鎮流器專門要求
|
|
IEC 60071-1
|
23 January 2006
|
Insulation co-ordination - Part 1: Definitions, principles and rules
|
絕緣體分類—第1部分：定義，原則和規則
|
|
IEC 60745-2-6-am1
|
23 January 2006
|
Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers
|
修改1---手持馬達---開動的電氣工具---安全性---第2-6部分：錘子的專門要求
|
|
IEC 60454-3-2
|
23 January 2006
|
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
|
電氣目的用的壓敏膠帶---第3部分：個材料規范—規范2：具有熱固性橡膠、熱塑性橡膠或丙烯酸交聯劑的聚酯膜膠帶
|