該標準是在SY/T 5954-94《開鉆前驗收項目及要求》的基礎上修訂而成的，由江蘇石油勘探局鉆井處負責起草，規定了石油天然氣鉆井的井場布置與設備基礎、設備安裝、鉆井工程準備、后勤供應、安全和環境保護等開鉆前驗收項目的內容和要求，適用于陸上石油天然氣鉆井的一開鉆進前驗收。

    該標準與SY/T 5954-94相比，主要變化如下：

    ——增加了防洪防汛、防火、防爆安全預案方面的要求；

    ——增加了鉆井液池廢棄物的現場處理、井場廢棄物及生活垃圾的處理、井場噪音降消裝置等方面的要求；

    ——增加了柴油機安裝要求及電動鉆機的安裝要求。：

    主要描述了：

    （1）鉆前工程
    （2）設備安裝
    （3）鉆井工程準備
    （4）后勤供應
    （5）安全
    （6）環境保護

SY/T 5954-2004 Inspection items and requirements prior to spudding

The standard is revised on the base of standard SY/T 5954-94 Inspection Items & Specification Prior to Spudding, was drafted by Drilling Company of Jiangsu Oil Exploration Corporation, specifies the inspection items and requirements for oil and gas drilling, focusing on well-site layout, equipment foundation, and equipment installation; drilling operation preparation, logistics, safety and environment protection prior to spudding and is applicable to initial spud of onshore oil and gas well drilling operation.

Compared with SY/T 5954-94,  the main changes in this standard are as follows:
——Specifications of preliminary safety measures on prevention of flood, fire, explosion are added;
——Specifications on treatment of waste in drilling fluid pit, rubbish on well-site and camp, installation of noise-reducing device etc. are added;
——Installation specifications of diesel engines and electric rigs are added.

Key components:
(1)Well-site preparation
(2)Equipment installation
(3)Drilling engineering preparation
(4)Logistics supply
(5)Safety
(6)Environmental protection